Filter all products !
No image available for this category.
Filter
Prod. no.:
HPRC3500_EMPBLB
HPRC3500 Backpack outdoor case
Internal dimensions LxWxD: 430 x 320 x 160 mm
The 3500 Backpack is an injection-molded backpack that is watertight, airtight and virtually crushproof. It is made of TTX01 polypropylene plastic resin with a micro-textured surface to reduce scratching. It can be customizable with a cubed foam, with an interior nylon bag or can be purchased empty. The ergonomic back pad is made of fast drying antibacterial foam and was designed to be thicker in critical areas such as the shoulder blades and lumbar to provide the precise level of required support and protection. The adjustable shoulder and side straps are made of soft air mesh to allow for comfort and quick moisture evaporation. Four extra strong side loops have been molded in for attaching future accessories such as a jacket and helmet net as well as a tripod holder. Pack Basics Injection molded shell made of advanced patented plastic, TTX01 polypropylene-resin, for up to 20% lighter weight Micro-textured surface to reduce scratching Neoprene O-ring to keep the case air and watertight Air pressure release valve included Double-hinge locking latches for secure close and comfort open Four extra strong side loops have been molded in for attaching future accessories such as a jacket and helmet net as well as a tripod holder Certifications ATA (Air Transport Association) 300 rated IP67 Military specification for protection against dust and against the effect of immersion between 15cm and 1.0 m STANAG 4280 is a NATO specification for high and low temperatures for extended periods of time (up to 131° Fahrenheit for 48 hours and as low as -4.0° Fahrenheit for 16 hours) DS 81-41 (military-grade)
The 3500 Backpack is an injection-molded backpack that is watertight, airtight and virtually crushproof. It is made of TTX01 polypropylene plastic resin with a micro-textured surface to reduce scratching. It can be customizable with a cubed foam, with an interior nylon bag or can be purchased empty. The ergonomic back pad is made of fast drying antibacterial foam and was designed to be thicker in critical areas such as the shoulder blades and lumbar to provide the precise level of required support and protection. The adjustable shoulder and side straps are made of soft air mesh to allow for comfort and quick moisture evaporation. Four extra strong side loops have been molded in for attaching future accessories such as a jacket and helmet net as well as a tripod holder. Pack Basics Injection molded shell made of advanced patented plastic, TTX01 polypropylene-resin, for up to 20% lighter weight Micro-textured surface to reduce scratching Neoprene O-ring to keep the case air and watertight Air pressure release valve included Double-hinge locking latches for secure close and comfort open Four extra strong side loops have been molded in for attaching future accessories such as a jacket and helmet net as well as a tripod holder Certifications ATA (Air Transport Association) 300 rated IP67 Military specification for protection against dust and against the effect of immersion between 15cm and 1.0 m STANAG 4280 is a NATO specification for high and low temperatures for extended periods of time (up to 131° Fahrenheit for 48 hours and as low as -4.0° Fahrenheit for 16 hours) DS 81-41 (military-grade)
Regular price:
€274.53
Prod. no.:
HPRC3500WKZ
HPRC3500 TOOL CASE
Internal dimensions LxWxD: 430 x 320 x 160 mm
EXTRA STRONG: Shockproof TTX01. PP supplemented with particularly powerful special resin. SHATTERPROOF: Elastic, robust suitcase shells with maximum impact resistance. RESISTANT: Acid-resistant, scratch-resistant and waterproof, dustproof and light spill. IP 67th CLIMATE TESTED: Withstands extreme weather conditions and temperature fluctuations from -40 ° C to + 80 °. TESTED: Certified product quality. AIRFREIGHT-SUITABLE: Reinforced edges. Integrated ID tag. Hand valve for pressure equalization. SAFE: Steel-reinforced hinges. Handles aluminum reinforced. Smooth, reliable closures. ERGONOMIC: Soft handle for increased comfort. PRACTICAL: With backpack function. LOADS: The carrying capacity of this series is 0.5kg - about 30 kg capacity, depending on the model. INDIVIDUAL: Interior Design, printing and different color combinations on request. GUARANTEED: In this model we grant a three year warranty. We also provide you with spare parts and repair services.
EXTRA STRONG: Shockproof TTX01. PP supplemented with particularly powerful special resin. SHATTERPROOF: Elastic, robust suitcase shells with maximum impact resistance. RESISTANT: Acid-resistant, scratch-resistant and waterproof, dustproof and light spill. IP 67th CLIMATE TESTED: Withstands extreme weather conditions and temperature fluctuations from -40 ° C to + 80 °. TESTED: Certified product quality. AIRFREIGHT-SUITABLE: Reinforced edges. Integrated ID tag. Hand valve for pressure equalization. SAFE: Steel-reinforced hinges. Handles aluminum reinforced. Smooth, reliable closures. ERGONOMIC: Soft handle for increased comfort. PRACTICAL: With backpack function. LOADS: The carrying capacity of this series is 0.5kg - about 30 kg capacity, depending on the model. INDIVIDUAL: Interior Design, printing and different color combinations on request. GUARANTEED: In this model we grant a three year warranty. We also provide you with spare parts and repair services.
Regular price:
€224.71
Prod. no.:
HPRC3600_EMPBLB
HPRC3600 Backpack
Internal dimensions LxWxD: 479 x 354 x 194 mm
Rigid watertight, airtight backpack that can withstand falls. This version, an update of the previous backpack, the HPRC3500, has been designed to guarantee greater capacity and versatility of use. Features: - Up to 30% more space than the HPRC3500 - Higher capacity - Increased versatility - More uses - Modern and essential design expressed through clean and squared lines - Larger and shock-resistant Name Plate, allowing more immediacy and durability when using - 4 latches (2 more than the previous version) for safer closure and more comfortable case opening - Improvements to the four extra strong side loops, cleverly designed to attach straps for carrying further accessories (tripods, helmets, etc.) - Unparalleled protection Three different internal configurations available: with cubed foam, with second skin or empty.
Rigid watertight, airtight backpack that can withstand falls. This version, an update of the previous backpack, the HPRC3500, has been designed to guarantee greater capacity and versatility of use. Features: - Up to 30% more space than the HPRC3500 - Higher capacity - Increased versatility - More uses - Modern and essential design expressed through clean and squared lines - Larger and shock-resistant Name Plate, allowing more immediacy and durability when using - 4 latches (2 more than the previous version) for safer closure and more comfortable case opening - Improvements to the four extra strong side loops, cleverly designed to attach straps for carrying further accessories (tripods, helmets, etc.) - Unparalleled protection Three different internal configurations available: with cubed foam, with second skin or empty.
Regular price:
€321.18
Prod. no.:
HPRC4050_EMPBLB
HPRC4050 outdoor case
Internal dimensions LxWxD: 261 x 171 x 220 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€110.31
Prod. no.:
HPRC4100_EMPBLB
HPRC4100 outdoor case
Internal dimensions LxWxD: 401 x 231 x 231 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€137.92
Prod. no.:
HPRC4200_EMPBLB
HPRC4200
Internal dimensions LxWxD: 460 x 240 x 400 mm
Leichter, wasserdichter und unverwüstlicher Kunstharzkoffer mit individuell anpassbarem Innenraum. Er kann leer, innen vollständig mit vorgeschnittener Schaumstoffeinlage (bestehend aus einer Schicht genopptem Material am Deckel, einem glatten Boden und einer Zwischenschicht) oder mit der Innentasche aus Nylon erworben werden. ergonomischer Griff aus PP+ SEBS-Materialien und einen Stahlzapfen für ein hohes Maß an Ergonomie Automatikventil, das den Luftdruck im Inneren automatisch reguliert O-Ring innen aus expandiertem EPDM, der den Koffer absolut wasserdicht macht Extrem robuste Verschlusshaken. Das zweistufige Öffnungs-/Schließsystem sorgt neben einem besonders flüssigen Bewegungsablauf auch dafür, dass das Öffnen der Haken im Falle eines Sturzes verhindert wird verstärkte Ecken, damit sie extrem beständig gegen Stöße sind Materialien: Das Modell wird aus einem patentierten Material hergestellt, das aus einer speziellen Mischung aus Polypropylen TTX01, Glasfasern und Gummi gebildet wird. Außerdem bestehend aus PA66, SEBS, PA66GF30, ALU, Edelstahl. Maximaler Schutz bei minimalem Gewicht. Das TTX01 und die Verwendung von Materialien wie Aluminium bei den Trolleyausführungen ermöglichen es, ein Endgewicht von HPRC-Koffern zu erhalten, das bis zu 20% geringer ist, als das der Konkurrenz. Einen sehr leichten Hartschaltenkoffer zu haben, hat Vorteile bei der Nutzung, dem Transport und bei den Versandkosten. Es war eine Priorität bei der Entwicklung von HPRC-Koffern, die Leichtheit mit dem maximalen Schutz zu verbinden. Auf jeden Fall geht die Entwicklung des Materials TTX01 weiter: Die Suche nach Leichtheit, die nicht auf Kosten des Schutzes geht, stellen einen wesentlichen Aspekt für unser Unternehmen dar. Zertifizierungen: Das Material TTX01 verleiht den Koffern, dank seiner sehr hohen Beständigkeit und Elastizität, die Eigenschaft, gegen Stöße, Stürze und Druck widerstandsfähig zu sein. Ein HPRC-Koffer, der unter extremen Temperaturbedingungen (sowohl heiß als auch kalt) verwendet wird, verliert seine besonderen Eigenschaften nicht. Der unter Garantie stehende Temperaturbereich - 40 C° -( 40 °F) bis + 80 C°( +176 °F). Alle HPRC-Koffer sind wasserdicht, beständig gegen Staub, Säuren und Sand. Sie sind widerstandsfähig gegen Stürze und Stöße: ein Transportmittel also, das in Sachen Schutz unvergleichlich ist. Die HPRC-Linie wurde strengen Tests auf der Grundlage nationaler und internationaler Normen/Standards wie beispielsweise ATA 300, IP67, STANAG 4280, DS 81-41 STURZ, AUFPRALL, GRIFFE, WASSERDICHTE, UV-BESTÄNDIGKEIT DES MATERIALS UND DER FARBE unterzogen. Über diese Tests und Zertifizierungen wird die Qualität des HPRC-Produkts und seine Beständigkeit im Laufe der Zeit garantiert und bescheinigt. Darüber hinaus geben sie dem HPRC-Nutzer die Garantie, hochwertige Koffer zu kaufen, die vollständig in Italien entwickelt und produziert wurden.
Leichter, wasserdichter und unverwüstlicher Kunstharzkoffer mit individuell anpassbarem Innenraum. Er kann leer, innen vollständig mit vorgeschnittener Schaumstoffeinlage (bestehend aus einer Schicht genopptem Material am Deckel, einem glatten Boden und einer Zwischenschicht) oder mit der Innentasche aus Nylon erworben werden. ergonomischer Griff aus PP+ SEBS-Materialien und einen Stahlzapfen für ein hohes Maß an Ergonomie Automatikventil, das den Luftdruck im Inneren automatisch reguliert O-Ring innen aus expandiertem EPDM, der den Koffer absolut wasserdicht macht Extrem robuste Verschlusshaken. Das zweistufige Öffnungs-/Schließsystem sorgt neben einem besonders flüssigen Bewegungsablauf auch dafür, dass das Öffnen der Haken im Falle eines Sturzes verhindert wird verstärkte Ecken, damit sie extrem beständig gegen Stöße sind Materialien: Das Modell wird aus einem patentierten Material hergestellt, das aus einer speziellen Mischung aus Polypropylen TTX01, Glasfasern und Gummi gebildet wird. Außerdem bestehend aus PA66, SEBS, PA66GF30, ALU, Edelstahl. Maximaler Schutz bei minimalem Gewicht. Das TTX01 und die Verwendung von Materialien wie Aluminium bei den Trolleyausführungen ermöglichen es, ein Endgewicht von HPRC-Koffern zu erhalten, das bis zu 20% geringer ist, als das der Konkurrenz. Einen sehr leichten Hartschaltenkoffer zu haben, hat Vorteile bei der Nutzung, dem Transport und bei den Versandkosten. Es war eine Priorität bei der Entwicklung von HPRC-Koffern, die Leichtheit mit dem maximalen Schutz zu verbinden. Auf jeden Fall geht die Entwicklung des Materials TTX01 weiter: Die Suche nach Leichtheit, die nicht auf Kosten des Schutzes geht, stellen einen wesentlichen Aspekt für unser Unternehmen dar. Zertifizierungen: Das Material TTX01 verleiht den Koffern, dank seiner sehr hohen Beständigkeit und Elastizität, die Eigenschaft, gegen Stöße, Stürze und Druck widerstandsfähig zu sein. Ein HPRC-Koffer, der unter extremen Temperaturbedingungen (sowohl heiß als auch kalt) verwendet wird, verliert seine besonderen Eigenschaften nicht. Der unter Garantie stehende Temperaturbereich - 40 C° -( 40 °F) bis + 80 C°( +176 °F). Alle HPRC-Koffer sind wasserdicht, beständig gegen Staub, Säuren und Sand. Sie sind widerstandsfähig gegen Stürze und Stöße: ein Transportmittel also, das in Sachen Schutz unvergleichlich ist. Die HPRC-Linie wurde strengen Tests auf der Grundlage nationaler und internationaler Normen/Standards wie beispielsweise ATA 300, IP67, STANAG 4280, DS 81-41 STURZ, AUFPRALL, GRIFFE, WASSERDICHTE, UV-BESTÄNDIGKEIT DES MATERIALS UND DER FARBE unterzogen. Über diese Tests und Zertifizierungen wird die Qualität des HPRC-Produkts und seine Beständigkeit im Laufe der Zeit garantiert und bescheinigt. Darüber hinaus geben sie dem HPRC-Nutzer die Garantie, hochwertige Koffer zu kaufen, die vollständig in Italien entwickelt und produziert wurden.
Regular price:
€200.40
Prod. no.:
HPRC4300_EMPBLB
HPRC4300 outdoor case
Internal dimensions LxWxD: 585 x 320 x 309 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€238.48
Prod. no.:
HPRC4300W_EMPBLB
HPRC4300W outdoor case wheeled
Internal dimensions LxWxD: 585 x 320 x 309 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€357.24
Prod. no.:
HPRC4400_EMPBLB
HPRC4400 outdoor case
Internal dimensions LxWxD: 420 x 420 x 420 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€271.44
Prod. no.:
HPRC4600W_EMPBLB
HPRC4600W wheeled
Internal dimensions LxWxD: 611 x 611 x 345 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€374.14
Prod. no.:
HPRC4700W_EMPBLB
HPRC4700W outdoor case wheeled
Internal dimensions LxWxD: 508 x 301 x 497 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€404.84
Prod. no.:
HPRC4800W_EMPBLB
HPRC4800W outdoor case wheeled
Internal dimensions LxWxD: 720 x 320 x 600 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€398.41
Prod. no.:
HPRC5400W_EMPBLB
HPRC5400W outdoor case wheeled
Internal dimensions LxWxD: 1140 x 350 x 160 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€298.93
Prod. no.:
7450
INTENSE small plastic case
Internal dimensions LxWxD: 403 x 288 x 86 mm
Small, handy, and sturdy plastic case. Made in Germany. Ideal for secure transport and storage. High-quality.
Small, handy, and sturdy plastic case. Made in Germany. Ideal for secure transport and storage. High-quality.
Regular price:
€14.58
Prod. no.:
HW1411 - Auslaufartikel
Laptop bag HAND LITE
Practical and very lightweight carrying bag with numerous pockets for documents, business cards, and accessories made from tear-resistant polyester fabric.
Regular price:
€55.93
Prod. no.:
PANEXPL27HL
Lid Panel for 2712 & 2717
Practical and robust lid panel with pouches, ideal for small accessories and documents. Color: black
Regular price:
€25.82
Prod. no.:
PANEXPL27
Lid Panel for 2712 & 2717
Practical and robust lid panel with pouches, ideal for small accessories and documents. Color: black
Regular price:
€26.78
Prod. no.:
PANEXPL33HL
Lid Panel for 3317
Practical and robust lid panel with pouches, ideal for small accessories and documents. Color: black
Regular price:
€28.68
Prod. no.:
PANEXPL33
Lid Panel for 3317
Practical and robust lid panel with pouches, ideal for small accessories and documents. Color: black
Regular price:
€29.63
Prod. no.:
PANEXPL33W
Lid Panel for 3317W
Practical and robust lid panel with pouches, ideal for small accessories and documents. Color: black
Regular price:
€30.23
Prod. no.:
PANEXPL38
Lid Panel for 3818
Practical and robust lid panel with pouches, ideal for small accessories and documents. Color: black
Regular price:
€30.94
Prod. no.:
PANEXPL42
Lid Panel for 4209 & 4216
Practical and robust lid panel with pouches, ideal for small accessories and documents. Color: black
Regular price:
€33.80
Prod. no.:
PANEXPL44HL
Lid Panel for 4412 & 4419
Practical and robust lid panel with pouches, ideal for small accessories and documents. Color: black
Regular price:
€34.27
Prod. no.:
PANEXPL44
Lid Panel for 4412 & 4419
Practical and robust lid panel with pouches, ideal for small accessories and documents. Color: black
Regular price:
€35.46