Filter all products !
No image available for this category.
Filter
Prod. no.:
GSLEEVE 78
Gun sleeve for 7814HL black
Designed to secure your valuable rifle and accessories, the new G Sleeve bags provide protection in a highly mobile condition. A lightweight ruggedized 600D polyester outer fabric protects from humidity, while a padded interior keeps your rifle well protected. The internal rifle retention straps and the neoprene side flaps keep your firearm properly fixed.
Regular price:
€51.88
Prod. no.:
GSLEEVE 94
Gun sleeve for 9413 black
Designed to secure your valuable rifle and accessories, the new G Sleeve bags provide protection in a highly mobile condition. A lightweight ruggedized 600D polyester outer fabric protects from humidity, while a padded interior keeps your rifle well protected. The internal rifle retention straps and the neoprene side flaps keep your firearm properly fixed.
Regular price:
€55.69
Prod. no.:
HPRC2100_EMPBLB
HPRC2100 outdoor case
Internal dimensions LxWxD: 215 x 150 x 95 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€61.64
Prod. no.:
HPRC2200_EMPBLB
HPRC2200 outdoor case
Internal dimensions LxWxD: 236 x 182 x 105 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€80.68
Prod. no.:
HPRC2250_EMPBLB
HPRC2250 outdoor case
Internal dimensions LxWxD: 237 x 182 x 155 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). • The HPRCPF-002-01 panel frame is an accessory specially made for the HPRC2200-2250 case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). • The HPRCPF-002-01 panel frame is an accessory specially made for the HPRC2200-2250 case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€83.78
Prod. no.:
HPRC2300_EMPBLB
HPRC2300 outdoor case
Internal dimensions LxWxD: 305 x 230 x 137 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). • The HPRCPF-003-01 panel frame is an accessory specially made for the HPRC2300 case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). • The HPRCPF-003-01 panel frame is an accessory specially made for the HPRC2300 case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€103.89
Prod. no.:
HPRC2350_EMPBLB
HPRC2350 outdoor case
Internal dimensions LxWxD: 340 x 235 x 99 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€119.83
Prod. no.:
HPRC2400_EMPBLB
HPRC2400 outdoor case
Internal dimensions LxWxD: 375 x 265 x 152 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). • The HPRCPF-004-01 panel frame is an accessory specially made for the HPRC2400 case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). • The HPRCPF-004-01 panel frame is an accessory specially made for the HPRC2400 case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€134.71
Prod. no.:
HPRC2460_EMPBLB
HPRC2460 outdoor case
Internal dimensions LxWxD: 409 x 306 x 175 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It 's available with a cubed foam , a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). • The HPRCPF-005-01 panel frame is an accessory specially made for the HPRC2460 case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It 's available with a cubed foam , a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). • The HPRCPF-005-01 panel frame is an accessory specially made for the HPRC2460 case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€143.04
Prod. no.:
HPRC2500_EMPBLB
HPRC2500 outdoor case
Internal dimensions LxWxD: 450 x 320 x 175 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). • The HPRCPF-006-01 panel frame is an accessory specially made for the HPRC2500 case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). • The HPRCPF-006-01 panel frame is an accessory specially made for the HPRC2500 case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€173.86
Prod. no.:
HPRC2530_EMPBLB
HPRC2530 outdoor case
Internal dimensions LxWxD: 513 x 288 x 132 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It 's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It 's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€173.86
Prod. no.:
HPRC2550W_EMPBLB
HPRC2550W outdoor case wheeled
Internal dimensions LxWxD: 510 x 285 x 199 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior nylon bag, with Second Skin or can be purchased empty. • Built-in Wheels • New ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics and no protruding • Automatic valve which automatically adjusts the air pressure inside • Internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust thanks to the use of a double material. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • Reinforced corners that make it extremely shock-resistant • Re-designed secondary handle • New wider soft-touch overmold • More secure closure system thanks to the use of a double material • Nameplate included to the case • New wheels that can be personalized with your company’s name • The most large wheels that you can find at carry on case market for better taxiway and more stability • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (the temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F)) does not lose its own distinctive features. • The HPRCPF-009-01 panel frame is an accessory specially made for the HPRC2550W case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, sand and acids. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy. Caution Second Skin available only for the 2017 version. Available in the exclusive Gravel Grey color.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior nylon bag, with Second Skin or can be purchased empty. • Built-in Wheels • New ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics and no protruding • Automatic valve which automatically adjusts the air pressure inside • Internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust thanks to the use of a double material. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • Reinforced corners that make it extremely shock-resistant • Re-designed secondary handle • New wider soft-touch overmold • More secure closure system thanks to the use of a double material • Nameplate included to the case • New wheels that can be personalized with your company’s name • The most large wheels that you can find at carry on case market for better taxiway and more stability • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (the temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F)) does not lose its own distinctive features. • The HPRCPF-009-01 panel frame is an accessory specially made for the HPRC2550W case to create a large, solid, comfortable and portable work base on top of your case. All HPRC cases are watertight, resistant to dust, sand and acids. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy. Caution Second Skin available only for the 2017 version. Available in the exclusive Gravel Grey color.
Regular price:
€265.97
Prod. no.:
HPRC2580ADV
HPRC2580 ADV outdoor case
Internal dimensions LxWxD: 390 x 310 x 89 mm
EXTRA STRONG: Shockproof TTX01. PP supplemented with particularly powerful special resin. SHATTERPROOF: Elastic, robust suitcase shells with maximum impact resistance. RESISTANT: Acid-resistant, scratch-resistant and waterproof, dustproof and light spill. IP 67th CLIMATE TESTED: Withstands extreme weather conditions and temperature fluctuations from -40 ° C to + 80 °. TESTED: Certified product quality. Model 8230, 8.260W, 8.270W and 8.280W with NATO specification. IMAGE COMPLIANT: Modern design suitable for use in transportation, outdoor and presentation. AIRFREIGHT-SUITABLE: Reinforced edges. Integrated ID tag. Hand valve for pressure equalization. SAFE: Steel-reinforced hinges. Handles aluminum reinforced. Smooth, reliable closures. ERGONOMIC: Soft handles for increased comfort. Model 8.255W, 8.260W, 8.270W and 8.280W with pull-out handle. COMFORTABLE: Model 8.255W, 8.260W, 8.270W, 8.278W, 8.280W and 8.540W with smooth-running, integrated roles. PRACTICAL: Model 8258 with an extra openable outer flap. 8,350 with backpack function. LOADS: The carrying capacity of this series is 0.5kg - about 30 kg capacity, depending on the model. INDIVIDUAL: Interior Design, printing and different color combinations on request. GUARANTEED: In this model we grant a three year warranty. We also provide you with spare parts and repair services.
EXTRA STRONG: Shockproof TTX01. PP supplemented with particularly powerful special resin. SHATTERPROOF: Elastic, robust suitcase shells with maximum impact resistance. RESISTANT: Acid-resistant, scratch-resistant and waterproof, dustproof and light spill. IP 67th CLIMATE TESTED: Withstands extreme weather conditions and temperature fluctuations from -40 ° C to + 80 °. TESTED: Certified product quality. Model 8230, 8.260W, 8.270W and 8.280W with NATO specification. IMAGE COMPLIANT: Modern design suitable for use in transportation, outdoor and presentation. AIRFREIGHT-SUITABLE: Reinforced edges. Integrated ID tag. Hand valve for pressure equalization. SAFE: Steel-reinforced hinges. Handles aluminum reinforced. Smooth, reliable closures. ERGONOMIC: Soft handles for increased comfort. Model 8.255W, 8.260W, 8.270W and 8.280W with pull-out handle. COMFORTABLE: Model 8.255W, 8.260W, 8.270W, 8.278W, 8.280W and 8.540W with smooth-running, integrated roles. PRACTICAL: Model 8258 with an extra openable outer flap. 8,350 with backpack function. LOADS: The carrying capacity of this series is 0.5kg - about 30 kg capacity, depending on the model. INDIVIDUAL: Interior Design, printing and different color combinations on request. GUARANTEED: In this model we grant a three year warranty. We also provide you with spare parts and repair services.
Regular price:
€281.79
Prod. no.:
HPRC2580_EMPBLB
HPRC2580 outdoor case
Internal dimensions LxWxD: 390 x 310 x 89 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, or with an interior ADV KIT (Removable Shoulder Strap with Pad, Three Zippered Pouches inside the Lid, and Laptop Bag up to 15'') or can be purchased empty. • Ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • Automatic valve which automatically adjusts the air pressure inside • Internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, or with an interior ADV KIT (Removable Shoulder Strap with Pad, Three Zippered Pouches inside the Lid, and Laptop Bag up to 15'') or can be purchased empty. • Ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • Automatic valve which automatically adjusts the air pressure inside • Internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€185.52
Prod. no.:
HPRC2600_EMPBLB
HPRC2600 outdoor case
Internal dimensions LxWxD: 480 x 360 x 198 mm
Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of neoprene PA66 makes the case is totally waterproof • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. The entire production line of HPRC cases is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of neoprene PA66 makes the case is totally waterproof • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. The entire production line of HPRC cases is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€195.04
Prod. no.:
HPRC2600W
HPRC2600W outdoor case wheeled
Internal dimensions LxWxD: 484 x 360 x 218 mm
Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. •Built-in Wheels • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of neoprene PA66 makes the case is totally waterproof • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRCcases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. The entire production line of HPRC cases is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy. Available in Gravel Grey color.
Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. •Built-in Wheels • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of neoprene PA66 makes the case is totally waterproof • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRCcases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. The entire production line of HPRC cases is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy. Available in Gravel Grey color.
Regular price:
From
€291.55
Prod. no.:
HPRC2700
HPRC2700 outdoor case
Internal dimensions LxWxD: 550 x 460 x 205 mm
Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of neoprene PA66 makes the case is totally waterproof • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. The entire production line of HPRC cases is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of neoprene PA66 makes the case is totally waterproof • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. The entire production line of HPRC cases is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
From
€262.75
Prod. no.:
HPRC2700W_EMPBLB
HPRC2700W outdoor case wheeled
Internal dimensions LxWxD: 555 x 460 x 256 mm
Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. • Built-in Wheels • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of neoprene PA66 makes the case is totally waterproof • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. The entire production line of HPRC cases is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy. Available in Gravel Grey color.
Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam, with an interior soft deck with dividers, with an interior nylon bag or can be purchased empty. • Built-in Wheels • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of neoprene PA66 makes the case is totally waterproof • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. The entire production line of HPRC cases is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy. Available in Gravel Grey color.
Regular price:
€352.84
Prod. no.:
HPRC2710_EMPBLB
HPRC2710
Internal dimensions LxWxD: 555 x 459 x 256 mm
Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of neoprene PA66 makes the case is totally waterproof • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. The entire production line of HPRC cases is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, waterproof, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of neoprene PA66 makes the case is totally waterproof • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. The entire production line of HPRC cases is ISO9001 confirming a particular attention and interest in maintaining a product at the highest level. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€268.35
Prod. no.:
HPRC2730W_EMPBLB
HPRC2730W outdoor case wheeled
Internal dimensions LxWxD: 509 x 460 x 316 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€364.62
Prod. no.:
HPRC2745W_EMPBLB
HPRC2745W wheeled
Internal dimensions LxWxD: 771 x 401 x 247 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€317.97
Prod. no.:
HPRC2760W_EMPBLB
HPRC2760W wheeled
Internal dimensions LxWxD: 690 x 450 x 300 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€357.24
Prod. no.:
HPRC2780W_EMPBLB
HPRC2780W outdoor case wheeled
Internal dimensions LxWxD: 748 x 524 x 362 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€374.14
Prod. no.:
HPRC2800W_EMPBLB
HPRC2800W outdoor case wheeled
Internal dimensions LxWxD: 745 x 525 x 458 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€384.73