Outdoor cases
Filter
Prod. no.:
10840.BE
EXPLORER Case 10840
Internal dimensions LxWxD: 1080 x 620 x 400 mm
Mobile armoury case for guns
Mobile armoury case for guns
Regular price:
€758.63
Prod. no.:
996S-000BK-0A0-1
NANUK™ 996 outdoor case
Internal dimensions LxWxD: 1400 x 409 x 226 mm
At more than 58" or 148cm, the NANUK 996 is our longest long case we've ever made. Built for extra long equipment that requires premium protection that's waterproof and dustproof. Available empty or with 4 solid foam layers interior, this case is long on options. The NANUK 996 was built to organize, protect, and mobilize industrial equipment to photography lighting equipment to long firrearms to musical instruments, and much more. The 996 is strong, tough, and virtually indestructible thanks to it's NK-7 resin shell and ultra tough wheels, handles, and legendary PowerClaw latches.
At more than 58" or 148cm, the NANUK 996 is our longest long case we've ever made. Built for extra long equipment that requires premium protection that's waterproof and dustproof. Available empty or with 4 solid foam layers interior, this case is long on options. The NANUK 996 was built to organize, protect, and mobilize industrial equipment to photography lighting equipment to long firrearms to musical instruments, and much more. The 996 is strong, tough, and virtually indestructible thanks to it's NK-7 resin shell and ultra tough wheels, handles, and legendary PowerClaw latches.
Regular price:
€756.78
Prod. no.:
988S-000BK-0A0
NANUK™ 988 outdoor case
Internal dimensions LxWxD: 1060 x 346 x 318 mm
Long, deep, rugged, and tough, NANUK 988 will protect and mobilize loads of gear with room to spare. It's built to go fast with stainless steel ball-bearing wheels and three spring-loaded handles that make it the perfect premium waterproof protective case to go anywhere. Waterproof and dustproof, it's built so it can be thrown in the back of a pick-up, stacked on a pallet, taken to the set, or the range with confidence. Designed with a long and deep interior of 41.75" x 13.63’’x 12.5" (1060mm x 346mm x 318mm), it fits lighting equipment, tripods, camera equipment, telescopes, bunker gear, rifles, chainsaws, industrial equipment, and more. The 988 is part of our Configurable Series. The base model equipped with three (3) ultra-strong handles and two (2) strong polyurethane large wheels with stainless steel ball bearings is for any terrain. If your needs change, the wheel rigs on the 988 are removable and can be replaced by our custom corner caps. Like all NANUK waterproof protective cases, the 988 is made of NK7 resin and equipped with six (6) of our legendary PowerClaw latches. The 988 is indestructible and will never open accidentally. Molded with aggressive ribs and taller feet, it's highly stackable. The 988 comes with our lifetime warranty, your assurance that we build cases to protect your most valuable gear for life. Additionally, a polycarbonate ID Window is available as an option. It attaches quickly and easily to the front of the 988. Other options include TSA Approved Latches as a retrofit kit, TSA Approved Padlocks, Panel Installation Kit, Multi-Layer Solid Foam, and Padded Dividers (Late availability).
Long, deep, rugged, and tough, NANUK 988 will protect and mobilize loads of gear with room to spare. It's built to go fast with stainless steel ball-bearing wheels and three spring-loaded handles that make it the perfect premium waterproof protective case to go anywhere. Waterproof and dustproof, it's built so it can be thrown in the back of a pick-up, stacked on a pallet, taken to the set, or the range with confidence. Designed with a long and deep interior of 41.75" x 13.63’’x 12.5" (1060mm x 346mm x 318mm), it fits lighting equipment, tripods, camera equipment, telescopes, bunker gear, rifles, chainsaws, industrial equipment, and more. The 988 is part of our Configurable Series. The base model equipped with three (3) ultra-strong handles and two (2) strong polyurethane large wheels with stainless steel ball bearings is for any terrain. If your needs change, the wheel rigs on the 988 are removable and can be replaced by our custom corner caps. Like all NANUK waterproof protective cases, the 988 is made of NK7 resin and equipped with six (6) of our legendary PowerClaw latches. The 988 is indestructible and will never open accidentally. Molded with aggressive ribs and taller feet, it's highly stackable. The 988 comes with our lifetime warranty, your assurance that we build cases to protect your most valuable gear for life. Additionally, a polycarbonate ID Window is available as an option. It attaches quickly and easily to the front of the 988. Other options include TSA Approved Latches as a retrofit kit, TSA Approved Padlocks, Panel Installation Kit, Multi-Layer Solid Foam, and Padded Dividers (Late availability).
Regular price:
€742.50
Prod. no.:
10826.BE
EXPLORER Case 10826
Internal dimensions LxWxD: 1080 x 620 x 260 mm
Multi-weapons transport cases
Multi-weapons transport cases
Regular price:
€658.78
Prod. no.:
7745.B E
EXPLORER Case 7745
Internal dimensions LxWxD: 770 x 580 x 450 mm
Light, water and dust tight cases.
Light, water and dust tight cases.
Regular price:
€533.24
Prod. no.:
995S-001BK-0A0
NANUK™ 995 outdoor case
Internal dimensions LxWxD: 1321 x 368 x 152 mm
Measuring 52” inside, the NANUK 995 is our longest case built for extreme protection and transportation of double rifles, primarily. It has earned the trust of sportsmen, sportswomen, hunters, law enforcement and the military. After all, the NANUK 995 is built to survive the outdoors, water, dust, impact and all kinds of abuse. It’s made to get in harm’s way so the gear inside stays safe and unharmed. It’s no wonder that it has also become the go-to case for photo and video pros who also use the NANUK 995 for lighting kits and tripods. Built to organize, protect, carry and survive tough conditions, the 995 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s four (4) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. For extra security, two latches feature an integrated TSA accepted key lock to keep your equipment securely locked during transit but accessible for inspection by the TSA when required. This indestructible MIL-Spec case is equipped with a lid stay feature to keep the case safely open when in use and the reinforced stainless-steel eyelets can be used to secure additional padlocks. The NANUK 995 protective case comes with two (2) soft grip and ergonomic handles to make it easy and comfortable to transport. The handles feature stainless steel hardware that are spring-loaded to avoid harm when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with solid foam, custom foam or the case can be purchased empty.
Measuring 52” inside, the NANUK 995 is our longest case built for extreme protection and transportation of double rifles, primarily. It has earned the trust of sportsmen, sportswomen, hunters, law enforcement and the military. After all, the NANUK 995 is built to survive the outdoors, water, dust, impact and all kinds of abuse. It’s made to get in harm’s way so the gear inside stays safe and unharmed. It’s no wonder that it has also become the go-to case for photo and video pros who also use the NANUK 995 for lighting kits and tripods. Built to organize, protect, carry and survive tough conditions, the 995 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s four (4) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. For extra security, two latches feature an integrated TSA accepted key lock to keep your equipment securely locked during transit but accessible for inspection by the TSA when required. This indestructible MIL-Spec case is equipped with a lid stay feature to keep the case safely open when in use and the reinforced stainless-steel eyelets can be used to secure additional padlocks. The NANUK 995 protective case comes with two (2) soft grip and ergonomic handles to make it easy and comfortable to transport. The handles feature stainless steel hardware that are spring-loaded to avoid harm when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with solid foam, custom foam or the case can be purchased empty.
Regular price:
€516.40
Prod. no.:
960S-000BK-0A0
NANUK™ 960 outdoor case
Internal dimensions LxWxD: 559 x 432 x 327 mm
At 22 inches long and nearly 13 inches deep, the wheeled 960 is resistant to water, shock and heavy impact and can store a whole lot of your essentials. Easy to move around, the protective case gets you through any terrain with its tough polyurethane wheels and three convenient soft grip handles. Built to organize, protect, carry and survive tough conditions, the 960 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and four (4) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 960 hard case offers the maximum level of protection for all of your professional equipment. The protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and functional on the market. The NANUK 960's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 960 case with wheels to get your gear safely from point A to point B. The 960’s three (3) soft grip and ergonomic handles to make it easy and comfortable to transport. They feature stainless steel hardware and 3 handles – 1 with handle stay and 2 spring loaded - to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
At 22 inches long and nearly 13 inches deep, the wheeled 960 is resistant to water, shock and heavy impact and can store a whole lot of your essentials. Easy to move around, the protective case gets you through any terrain with its tough polyurethane wheels and three convenient soft grip handles. Built to organize, protect, carry and survive tough conditions, the 960 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and four (4) PowerClaw latches. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 960 hard case offers the maximum level of protection for all of your professional equipment. The protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and functional on the market. The NANUK 960's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK 960 case with wheels to get your gear safely from point A to point B. The 960’s three (3) soft grip and ergonomic handles to make it easy and comfortable to transport. They feature stainless steel hardware and 3 handles – 1 with handle stay and 2 spring loaded - to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Regular price:
€514.02
Prod. no.:
13527.B E
EXPLORER Case 13527
Internal dimensions LxWxD: 1350 x 350 x 272 mm
Double depth waterproof cases for rifles.
Double depth waterproof cases for rifles.
Regular price:
€497.90
Prod. no.:
990S-001BK-0A0
NANUK™ 990 outdoor case
Internal dimensions LxWxD: 1118 x 368 x 152 mm
A favorite of sportsmen, sportswomen, hunters, law enforcement and the military, the NANUK 990 is built to survive the outdoors, water, dust and abuse of all kinds. At 44 inches inside, this case perfectly fits a single AR-15 or similar rifle and pistol, or a takedown shotgun and accessories. This military-grade case is also commonly used by photo and video pros as a lighting kit travel case or a tripod hard case. The NANUK 990 features-two spring loaded handles and rolls smoothly on its polyurethane wheels. Built to organize, protect, carry and survive tough conditions, the 990 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell. Its four (4) PowerClaw latches, two of which feature an integrated TSA-accepted key lock, keep your equipment securely locked during transit but accessible for inspection by the TSA when required. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. This indestructible MIL-Spec case is equipped with a lid stay feature to keep the case safely open when in use and reinforced stainless-steel eyelets can be used to secure additional padlocks. The NANUK 990 protective case comes with two soft grip and ergonomic handles to make it easy and comfortable to transport. The handles feature stainless steel hardware and are spring-loaded to avoid harm way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with solid foam, custom foam or the case can be purchased empty.
A favorite of sportsmen, sportswomen, hunters, law enforcement and the military, the NANUK 990 is built to survive the outdoors, water, dust and abuse of all kinds. At 44 inches inside, this case perfectly fits a single AR-15 or similar rifle and pistol, or a takedown shotgun and accessories. This military-grade case is also commonly used by photo and video pros as a lighting kit travel case or a tripod hard case. The NANUK 990 features-two spring loaded handles and rolls smoothly on its polyurethane wheels. Built to organize, protect, carry and survive tough conditions, the 990 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell. Its four (4) PowerClaw latches, two of which feature an integrated TSA-accepted key lock, keep your equipment securely locked during transit but accessible for inspection by the TSA when required. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. This indestructible MIL-Spec case is equipped with a lid stay feature to keep the case safely open when in use and reinforced stainless-steel eyelets can be used to secure additional padlocks. The NANUK 990 protective case comes with two soft grip and ergonomic handles to make it easy and comfortable to transport. The handles feature stainless steel hardware and are spring-loaded to avoid harm way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with solid foam, custom foam or the case can be purchased empty.
Regular price:
€494.98
Prod. no.:
5140.BE.AH
EXPLORER Case 5140
Internal dimensions LxWxD: 516 x 296 x 402 mm
Waterproof containers with extractable drawers.
Waterproof containers with extractable drawers.
Regular price:
€467.43
Prod. no.:
7726.B E
EXPLORER Case 7726
Internal dimensions LxWxD: 770 x 580 x 265 mm
100% Made in Italy tough cases ideal to transport equipment.
100% Made in Italy tough cases ideal to transport equipment.
Regular price:
€427.92
Prod. no.:
7641.B E
EXPLORER Case 7641
Internal dimensions LxWxD: 765 x 485 x 415 mm
Big-size containers with wheels and side handles.
Big-size containers with wheels and side handles.
Regular price:
€425.66
Prod. no.:
938S-000BK-0A0
NANUK™ 938 outdoor case
Internal dimensions LxWxD: 546 x 318 x 294 mm
The NANUK 938 can store a whole lot of your essentials. At 21.5” long and nearly 12” deep, it offers the maximum level of protection for all of your personal and professional equipment. The NANUK 938 has the convenience of polyurethane wheels to make it easy to travel with your photo gear, video gear, audio gear, industrial equipment, medical equipment, outdoor gear and much more! Built to organize, protect, carry and survive tough conditions. The 938 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s dual PowerClaw latches. With NANUK’s exclusive locking and latching system, the NANUK 938 case stays shut and secured until you are ready to open it. Three soft-grip handles make this wheeled case one of the most convenient on the market. The 938's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. No matter where you go, you're guaranteed a smooth and easy ride. You can trust the world’s best protective case to get your gear safely from point A to point B. The NANUK 938 protective case comes with one retractable and three soft grip and ergonomic handles with stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
The NANUK 938 can store a whole lot of your essentials. At 21.5” long and nearly 12” deep, it offers the maximum level of protection for all of your personal and professional equipment. The NANUK 938 has the convenience of polyurethane wheels to make it easy to travel with your photo gear, video gear, audio gear, industrial equipment, medical equipment, outdoor gear and much more! Built to organize, protect, carry and survive tough conditions. The 938 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s dual PowerClaw latches. With NANUK’s exclusive locking and latching system, the NANUK 938 case stays shut and secured until you are ready to open it. Three soft-grip handles make this wheeled case one of the most convenient on the market. The 938's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. No matter where you go, you're guaranteed a smooth and easy ride. You can trust the world’s best protective case to get your gear safely from point A to point B. The NANUK 938 protective case comes with one retractable and three soft grip and ergonomic handles with stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Regular price:
€421.20
Prod. no.:
HPRC4700W_EMPBLB
HPRC4700W outdoor case wheeled
Internal dimensions LxWxD: 508 x 301 x 497 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€404.84
Prod. no.:
HPRC4800W_EMPBLB
HPRC4800W outdoor case wheeled
Internal dimensions LxWxD: 720 x 320 x 600 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€398.41
Prod. no.:
HPRC2800W_EMPBLB
HPRC2800W outdoor case wheeled
Internal dimensions LxWxD: 745 x 525 x 458 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€384.73
Prod. no.:
7630.B E
EXPLORER Case 7630
Internal dimensions LxWxD: 765 x 485 x 305 mm
Large cases IP67 certified.
Large cases IP67 certified.
Regular price:
€374.61
Prod. no.:
HPRC2780W_EMPBLB
HPRC2780W outdoor case wheeled
Internal dimensions LxWxD: 748 x 524 x 362 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€374.14
Prod. no.:
HPRC4600W_EMPBLB
HPRC4600W wheeled
Internal dimensions LxWxD: 611 x 611 x 345 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€374.14
Prod. no.:
MAX615TR
MAX615TR outdoor case
Internal dimensions LxWxD: 615 x 615 x 360 mm
EXTRA STRONG: Shockproof plastic material. PROTECTIVE: Waterproof and dustproof. IP65. Framed rubber seal. AIRFREIGHT SUITED: Pressure balance by hand operating valve. SECURE: Loop for padlock. PRACTICAL: Expanded folding handles. LOADS: The carrying capacity of this series is about 20 kg. EXTENSIVE: Padded organizer for photographic equipment and convulted foam in the lid.
EXTRA STRONG: Shockproof plastic material. PROTECTIVE: Waterproof and dustproof. IP65. Framed rubber seal. AIRFREIGHT SUITED: Pressure balance by hand operating valve. SECURE: Loop for padlock. PRACTICAL: Expanded folding handles. LOADS: The carrying capacity of this series is about 20 kg. EXTENSIVE: Padded organizer for photographic equipment and convulted foam in the lid.
Regular price:
€370.57
Prod. no.:
950S-000BK-0A0
NANUK™ 950 outdoor case
Internal dimensions LxWxD: 521 x 389 x 256 mm
Even at 20.5” long and 15.3” deep, the NANUK 950 makes moving heavy equipment easy. Its polyurethane wheels are smooth on all surfaces and the one-handed retractable handle gets you from point A to B without breaking a sweat. The same tough PowerClaw superior latching system, indestructible and impenetrable NK-7 resin shell but with wheeled convenience. With NANUK’s exclusive locking and latching system, the NANUK 950 stays shut and secured until you are ready to open it. Built to organize, protect, carry and survive tough conditions. The NANUK 950 hard case offers the maximum level of protection for all of your professional equipment. The protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, electronics, medical equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and easy-to-handle on the market. The 950's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. The NANUK 950’s ergonomic handles feature stainless steel hardware and integrated handle stays to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Even at 20.5” long and 15.3” deep, the NANUK 950 makes moving heavy equipment easy. Its polyurethane wheels are smooth on all surfaces and the one-handed retractable handle gets you from point A to B without breaking a sweat. The same tough PowerClaw superior latching system, indestructible and impenetrable NK-7 resin shell but with wheeled convenience. With NANUK’s exclusive locking and latching system, the NANUK 950 stays shut and secured until you are ready to open it. Built to organize, protect, carry and survive tough conditions. The NANUK 950 hard case offers the maximum level of protection for all of your professional equipment. The protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, electronics, medical equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient and easy-to-handle on the market. The 950's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. The NANUK 950’s ergonomic handles feature stainless steel hardware and integrated handle stays to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
Regular price:
€366.46
Prod. no.:
HPRC2730W_EMPBLB
HPRC2730W outdoor case wheeled
Internal dimensions LxWxD: 509 x 460 x 316 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€364.62
Prod. no.:
HPRC2760W_EMPBLB
HPRC2760W wheeled
Internal dimensions LxWxD: 690 x 450 x 300 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€357.24
Prod. no.:
HPRC4300W_EMPBLB
HPRC4300W outdoor case wheeled
Internal dimensions LxWxD: 585 x 320 x 309 mm
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Lightweight, watertight, unbreakable case that can be used to carry every kind of equipment and accessories. It's available with a cubed foam with a nylon bag or can be purchased empty. • ergonomic handle made of PP SEBS material and a steel pin to provide a high level of ergonomics • automatic valve which automatically adjusts the air pressure inside • internal O-ring made of expanded EPDM makes the case totally watertight • Closing hooks extremely robust. The system for opening / closing in two phases in addition to ensuring a particular fluidity of movement, prevents the hooks to open in case of fall • reinforced corners that make it extremely shock-resistant • Materials: made of a patented material given by a special compound based on polypropylene TTX01, glass fiber and rubber. It is also composed of PA66, SEBS, PA66GF30, ALU, Stainless Steel. Maximum protection with minimal weight. The TTX01 and the use of materials such as aluminum for the trolley versions, allow to obtain a final weight of HPRC cases up to 20% lighter than the competition. Having a hard case very slight advantages in the use of the port, in transport and shipping costs. It has been a priority in the creation of HPRC cases find the lightness combined with maximum protection. In any case the development of the material TTX01 continues: the search for lightness is not at the expense of protection, it’s a key point for our company. • Certification: Material TTX01 gives the cases the feature to withstand impacts, drops and pressures thanks to its high resistance associated elasticity. An HPRC case used to extreme temperatures (hot or cold) does not lose its own distinctive features. • The temperature range is guaranteed - 40 ° C - (40 ° F) up to + 80 ° C (+176 ° F). All HPRC cases are watertight, resistant to dust, acids and sand. Withstand falls and impacts: a means of transport so as to unparalleled protection. The HPRC collection has been subjected to severe tests based on norms / national and international standards, such as for example the ATA 300, IP67, STANAG 4280, DS 81-41 FALL, IMPACT HANDLE, SEALED, UV SEAL OF MATERIAL COLOR. These tests and certifications guarantee and certify the quality of the product HPRC and its durability. They also give a guarantee to the user HPRC can buy case of high quality designed and manufactured entirely in Italy.
Regular price:
€357.24
High-Quality Outdoor Cases from Rox for Every Requirement
For transport and presentations, it’s important to pack your devices and tools securely and compactly. With a specialized outdoor case made of plastic from our range, this is possible. You can choose optimal solutions and rely on a performance that meets your requirements and impresses as a complete solution made in Germany.
Outdoor Cases for Presentation and Device Transport
For the presentation, packaging, or transport of your products, it is important to focus on a special, high-quality, and robust packaging. With ROX complete solutions, you can trust the "Made in Germany" production and be assured that the selection of materials and their processing were carried out according to the strict criteria of the German market.
Every aluminum and plastic case is ISO 9001 and 14001 certified and meets the high standards for safety and product protection. Depending on your needs and requirements, you can focus on a customized solution and specify the key factors for you in terms of order quantity and design. Outdoor cases impress with their high load capacity and weather resistance, easy handling, precision in presentation, and in the packaging and transport of sensitive and high-value products or electronic devices.
Ready-for-use solutions are particularly popular, offering pre-configured cases that can be used immediately upon receipt. Your needs and requirements will determine whether you opt for contract manufacturing or commissioning, or an outdoor case including pre-configuration, as well as which design, material, and finish are optimal for you.
Different Models for Various Applications
Depending on the size and sensitivity of the product, you can choose from different cases and select your preferred model at a fair price-performance ratio. Whether Explorer Cases, NANUK™, HPRC Extreme Bags, PELI™ or PELI-Storm™, with a Rox outdoor case, you are always perfectly equipped.
To avoid waiting for external configuration, ROX offers an all-inclusive solution from a single source, impressing with quality and creativity in design. The high-quality materials protect your sensitive products from weather conditions and damage that can occur during improper transport or, for example, from a fall.
To ensure the safety of your machines, devices, or other products and tools, you should trust the best quality when selecting a case and choose the advantages of ROX.
Service for High Customer Satisfaction
The interior of the outdoor case can be customized according to your wishes. Share your ideas and trust in ROX’s expertise, which will implement your requirements with precision.
Your satisfaction is a priority and plays an equally important role in contract manufacturing or configuring standard models. For any questions, you can contact the ROX team and benefit from expert advice, helping you choose the perfect solution for your product. You can choose a durable and high-quality plastic for your outdoor case that convinces you in terms of price, performance, and finish.