Filter all products !
No image available for this category.
Filter
Prod. no.:
HW1431 - Auslaufartikel
Tool bag TOP CHEST
General features:Tool chest with internal and external pouches.Internal extractable PSS™ tool pallet.Adjustable shoulder strap.Removable top cover with Velcro system.Double wall side shells for impact protection.
Pictures with assembly and decoration (not included in the price)
Regular price:
€89.25
Prod. no.:
HW1429 - Auslaufartikel
Tool basket TOP BASKET L
General features:Tool basket with tool pouches.Adjustable shoulder strap and robust metal handle.Swing down front and rear walls to keep a 90° opening.Removable textile cover with Velcro straps..
Pictures with assembly and decoration (not included in the price)
Regular price:
€82.11
Prod. no.:
HW1432 - Auslaufartikel
Tool basket TOP BASKET M
Tool basket with tool pouches. Adjustable shoulderstrap and robust metal handle. Swing down front andrear walls to keep a 90° opening.
Pictures with assembly and decoration (not included in the price)
Regular price:
€124.67
Prod. no.:
MUB6
TOOL BOX MUB 65 - Multi Utility Box
Internal dimensions LxWxD: 653 x 340 x 312 mm
MUB Multi Utility Box - lightweight high capacity injection moulded polypropylene box for tough, heavy duty use. Ideal for use where high loading capacity is needed like construction sites, maintenance, transport, outdoor, nautical equipment.General features:- Water resistant construction- Shock resistant and corrosion proof- Moulded integral lifting points on both sides- Positive grab over latching catches- Lid reinforcements- Use in high/low temp environments- Padlocking provision- Stacking location points Pictures with assembly and decoration (not included in the price)
MUB Multi Utility Box - lightweight high capacity injection moulded polypropylene box for tough, heavy duty use. Ideal for use where high loading capacity is needed like construction sites, maintenance, transport, outdoor, nautical equipment.General features:- Water resistant construction- Shock resistant and corrosion proof- Moulded integral lifting points on both sides- Positive grab over latching catches- Lid reinforcements- Use in high/low temp environments- Padlocking provision- Stacking location points Pictures with assembly and decoration (not included in the price)
Regular price:
€88.89
Prod. no.:
MUB7
TOOL BOX MUB 78 - Multi Utility Box
Internal dimensions LxWxD: 780 x 410 x 330 mm
MUB Multi Utility Box - lightweight high capacity injection moulded polypropylene box for tough, heavy duty use. Ideal for use where high loading capacity is needed like construction sites, maintenance, transport, outdoor, nautical equipment.General features:- Water resistant construction- Shock resistant and corrosion proof- Moulded integral lifting points on both sides- Positive grab over latching catches- Lid reinforcements- Use in high/low temp environments- Padlocking provision- Stacking location points Pictures with assembly and decoration (not included in the price)
MUB Multi Utility Box - lightweight high capacity injection moulded polypropylene box for tough, heavy duty use. Ideal for use where high loading capacity is needed like construction sites, maintenance, transport, outdoor, nautical equipment.General features:- Water resistant construction- Shock resistant and corrosion proof- Moulded integral lifting points on both sides- Positive grab over latching catches- Lid reinforcements- Use in high/low temp environments- Padlocking provision- Stacking location points Pictures with assembly and decoration (not included in the price)
Regular price:
€146.37
Prod. no.:
HW1430 - Auslaufartikel
Tool bucket TOP LIFT BAG N
General features:Rope access and climbing tool bag.Featuring padded pouches and adjustable shoulder strap.Allows tools to be organized during suspended work.
Pictures with assembly and decoration (not included in the price)
Regular price:
€60.69
Prod. no.:
HW1415 - Auslaufartikel
Tool Bumbag N
General features:Adjustable tool bumbag with folding bib.Spacious internal padded tool area with pouches.
Pictures with assembly and decoration (not included in the price)
Regular price:
€59.65
Tip
Prod. no.:
AI1.KT01
Tool case ALL.IN.ONE GT Line
Internal dimensions LxWxD: 581 x 381 x 455 mm
Tool trolley specifically engineered for the professionals that need to carry a variety of hand tools, power tools and spare components, making it the ideal companion for all kind of MROs. Comes in a sturdy injection molded body made in copolymer polypropylene, able to withstand shocks, rough usage and harsh weather conditions, features two side handles, an extractable trolley handle (990 mm. extended height) and four robust and silent wheels. The upper compartment closed by the top lid, contains a removable tray for spare hand tools placed on top of a recessed area where 5 small component boxes or a laptop computer can be stored. The lower compartment, protected by a collapsible front door, can accommodate 3 to 8 removable drawers of variable height (30-60-95 mm.) with a variety of optional inner configurations such as pre-cubed bicolor foam layers, bin boxes for small components, and even specifically designed tool pallets, for all kind of small and big hand tools. All drawers, while completely accessible when open, are provided with a self restrain stop to prevent the accidental falling out. A central single key lock, as well as a metal reinforced padlock hole, grants the possibility to secure completely all compartments with one single key. A number of optional accessories such as lid tool pallets, pivoting wheels set, and extra drawers are available to make this product your Personal Maintenance Assistant. THIS PRODUCT IS POWERED BY INTELLIRESPOND, the free App that allows for personal tool inventory and control of the content. Please visit www.intellirespond.com General features: - 2 sides handles - Telescopic handle - 4 robust and silent self-oiling wheels - Unique "stop-in-open-position" drawers system - Removable tray in the upper compartment - 5 small component boxes (2 x WL01 - 2 x WL02 - 1 x WL04) - Central lock with key - I.D. removable label - Various padlockable points - Label for content identification - Several optional accessories - Great versatility in configurations - 2 jam free top lid latches with easy opening mechanism - 2 front main door latches - Stackability
Tool trolley specifically engineered for the professionals that need to carry a variety of hand tools, power tools and spare components, making it the ideal companion for all kind of MROs. Comes in a sturdy injection molded body made in copolymer polypropylene, able to withstand shocks, rough usage and harsh weather conditions, features two side handles, an extractable trolley handle (990 mm. extended height) and four robust and silent wheels. The upper compartment closed by the top lid, contains a removable tray for spare hand tools placed on top of a recessed area where 5 small component boxes or a laptop computer can be stored. The lower compartment, protected by a collapsible front door, can accommodate 3 to 8 removable drawers of variable height (30-60-95 mm.) with a variety of optional inner configurations such as pre-cubed bicolor foam layers, bin boxes for small components, and even specifically designed tool pallets, for all kind of small and big hand tools. All drawers, while completely accessible when open, are provided with a self restrain stop to prevent the accidental falling out. A central single key lock, as well as a metal reinforced padlock hole, grants the possibility to secure completely all compartments with one single key. A number of optional accessories such as lid tool pallets, pivoting wheels set, and extra drawers are available to make this product your Personal Maintenance Assistant. THIS PRODUCT IS POWERED BY INTELLIRESPOND, the free App that allows for personal tool inventory and control of the content. Please visit www.intellirespond.com General features: - 2 sides handles - Telescopic handle - 4 robust and silent self-oiling wheels - Unique "stop-in-open-position" drawers system - Removable tray in the upper compartment - 5 small component boxes (2 x WL01 - 2 x WL02 - 1 x WL04) - Central lock with key - I.D. removable label - Various padlockable points - Label for content identification - Several optional accessories - Great versatility in configurations - 2 jam free top lid latches with easy opening mechanism - 2 front main door latches - Stackability
Regular price:
€497.90
Prod. no.:
HW1402
TOOL CASE ATOMIK 215 PSS
Internal dimensions LxWxD: 465 x 352 x 215 mm
Technologically advanced, injection moulded, high thickness Polypropylene tool case. This material makes the case extremely resistant against chemical corrosion, shock, high and low temperature. The injection technique ensures constant material thickness, even in the corners.General features:- 2 metal lid safety support stays- 2 metal locks with keys- 3 metal hinges for maximum strength- bottom area with adjustable/removable dividers- ergonomic handle, rubber coated grip- address label - document area- can accomodate up to 3 tool pallets Pictures with assembly and decoration (not included in the price)
Technologically advanced, injection moulded, high thickness Polypropylene tool case. This material makes the case extremely resistant against chemical corrosion, shock, high and low temperature. The injection technique ensures constant material thickness, even in the corners.General features:- 2 metal lid safety support stays- 2 metal locks with keys- 3 metal hinges for maximum strength- bottom area with adjustable/removable dividers- ergonomic handle, rubber coated grip- address label - document area- can accomodate up to 3 tool pallets Pictures with assembly and decoration (not included in the price)
Regular price:
€262.28
Prod. no.:
HW1449
Tool case ATOMIK 215 PTS
Internal dimensions LxWxD: 465 x 352 x 215 mm
Impact-resistant even with temperature fluctuations. PP case shells connected by high-quality hinges. Upper and lower shells connected by an all-round aluminum frame. The tool panels are removable. The case is lockable. Product features: - 2 lockable locks incl. key (4 locks for Art. ATOMIK TWIN) - 1 ergonomic two-component handle - Base area with adjustable dividers - 2 lid holders with locking system (4 lid holders for ATOMIK TWIN) - Space for a 3rd tool tray (optional)Illustrations with equipment and decorative items (not included in the price)
Impact-resistant even with temperature fluctuations. PP case shells connected by high-quality hinges. Upper and lower shells connected by an all-round aluminum frame. The tool panels are removable. The case is lockable. Product features: - 2 lockable locks incl. key (4 locks for Art. ATOMIK TWIN) - 1 ergonomic two-component handle - Base area with adjustable dividers - 2 lid holders with locking system (4 lid holders for ATOMIK TWIN) - Space for a 3rd tool tray (optional)Illustrations with equipment and decorative items (not included in the price)
Regular price:
€242.24
Prod. no.:
HW1450
Tool case ATOMIK WH PSS
Internal dimensions LxWxD: 465 x 352 x 255 mm
Impact-resistant even with temperature fluctuations. PP case shells connected by high-quality hinges. Upper and lower shells connected by an all-round aluminum frame. The tool panels are removable. The case is lockable. Product features: - 2 lockable locks incl. key (4 locks for Art. ATOMIK TWIN) - 1 ergonomic two-component handle - Base area with adjustable dividers - 2 lid holders with locking system (4 lid holders for ATOMIK TWIN) - Space for a 3rd tool tray (optional)Illustrations with equipment and decorative items (not included in the price)
Impact-resistant even with temperature fluctuations. PP case shells connected by high-quality hinges. Upper and lower shells connected by an all-round aluminum frame. The tool panels are removable. The case is lockable. Product features: - 2 lockable locks incl. key (4 locks for Art. ATOMIK TWIN) - 1 ergonomic two-component handle - Base area with adjustable dividers - 2 lid holders with locking system (4 lid holders for ATOMIK TWIN) - Space for a 3rd tool tray (optional)Illustrations with equipment and decorative items (not included in the price)
Regular price:
€335.52
Prod. no.:
HW1404 - Auslaufartikel
TOOL CASE GT 42-16 PTS
Internal dimensions LxWxD: 420 x 300 x 160 mm
Auslaufartikel
Auslaufartikel
Regular price:
€207.06
Prod. no.:
HW1406
TOOL CASE GT 52-21 PSS
Internal dimensions LxWxD: 520 x 285 x 205 mm
Watertight and perfectly sealed thanks to the exclusive neoprene “O” ring and to the purge valve, these cases grant an absolute protection to your tools. Made of resistant lightweight resin, they are provided with strong locks and a useful and ergonomic handle. They are ideal for use in the harshest environment, such as industrial, aeronautical, military and nautical fields.General features:• waterproof and airtight (IP 67)• interstackable• corrosionproof, sandproof and dustproof• shockproof and crushproof• temperature rating -33°C/+90°C• ergonomic handle, rubber coated grip• jam free latches with user-friendly opening mechanism• corrosion proof metal hinges with lid stay features• pressure release valve• special PU injected seal• stainless steel reinforced pad lockable points providing maximum security 1 Upper tool pallet with PSS system 1 Lower tool pallet with PTS system Pictures with assembly and decoration (not included in the price)
Watertight and perfectly sealed thanks to the exclusive neoprene “O” ring and to the purge valve, these cases grant an absolute protection to your tools. Made of resistant lightweight resin, they are provided with strong locks and a useful and ergonomic handle. They are ideal for use in the harshest environment, such as industrial, aeronautical, military and nautical fields.General features:• waterproof and airtight (IP 67)• interstackable• corrosionproof, sandproof and dustproof• shockproof and crushproof• temperature rating -33°C/+90°C• ergonomic handle, rubber coated grip• jam free latches with user-friendly opening mechanism• corrosion proof metal hinges with lid stay features• pressure release valve• special PU injected seal• stainless steel reinforced pad lockable points providing maximum security 1 Upper tool pallet with PSS system 1 Lower tool pallet with PTS system Pictures with assembly and decoration (not included in the price)
Regular price:
€299.13
Prod. no.:
HW1405
TOOL CASE GT 52-21 PTS
Internal dimensions LxWxD: 520 x 285 x 205 mm
Watertight and perfectly sealed thanks to the exclusive neoprene “O” ring and to the purge valve, these cases grant an absolute protection to your tools. Made of resistant lightweight resin, they are provided with strong locks and a useful and ergonomic handle. They are ideal for use in the harshest environment, such as industrial, aeronautical, military and nautical fields.General features:• waterproof and airtight (IP 67)• interstackable• corrosionproof, sandproof and dustproof• shockproof and crushproof• temperature rating -33°C/+90°C• ergonomic handle, rubber coated grip• jam free latches with user-friendly opening mechanism• corrosion proof metal hinges with lid stay features• pressure release valve• special PU injected seal• stainless steel reinforced pad lockable points providing maximum security Pictures with assembly and decoration (not included in the price)
Watertight and perfectly sealed thanks to the exclusive neoprene “O” ring and to the purge valve, these cases grant an absolute protection to your tools. Made of resistant lightweight resin, they are provided with strong locks and a useful and ergonomic handle. They are ideal for use in the harshest environment, such as industrial, aeronautical, military and nautical fields.General features:• waterproof and airtight (IP 67)• interstackable• corrosionproof, sandproof and dustproof• shockproof and crushproof• temperature rating -33°C/+90°C• ergonomic handle, rubber coated grip• jam free latches with user-friendly opening mechanism• corrosion proof metal hinges with lid stay features• pressure release valve• special PU injected seal• stainless steel reinforced pad lockable points providing maximum security Pictures with assembly and decoration (not included in the price)
Regular price:
€299.13
Prod. no.:
HW1408 - Auslaufartikel
TOOL CASE GT 58-23
Internal dimensions LxWxD: 580 x 440 x 220 mm
Auslaufartikel
Auslaufartikel
Regular price:
€443.87
Prod. no.:
HW1448
Tool case NEW MEGA WHEELS PTS
Internal dimensions LxWxD: 453 x 345 x 185 mm
Double-walled tool case made of HDPE with integrated TSA locks. Equipped with telescopic handle and large castors. Airworthy model, impact-resistant and corrosion-free. Product features: - Document compartment - 2 lockable TSA locks incl. key - 1 ergonomic two-component handle - Locking telescopic handle and large, smooth-running transport wheels - Bottom section with adjustable dividers - Reliable hinge riveted at several points - 2 lid holders with locking system - 2 small parts containers (Art. WL01 + WL02) - Stackable on the same model NM WHEELSIllustrations with fittings and decorative items (not included in the price)
Double-walled tool case made of HDPE with integrated TSA locks. Equipped with telescopic handle and large castors. Airworthy model, impact-resistant and corrosion-free. Product features: - Document compartment - 2 lockable TSA locks incl. key - 1 ergonomic two-component handle - Locking telescopic handle and large, smooth-running transport wheels - Bottom section with adjustable dividers - Reliable hinge riveted at several points - 2 lid holders with locking system - 2 small parts containers (Art. WL01 + WL02) - Stackable on the same model NM WHEELSIllustrations with fittings and decorative items (not included in the price)
Regular price:
€413.38
Prod. no.:
HW1447
Tool case ROCK TURTLE PTS
Internal dimensions LxWxD: 470 x 390 x 320 mm
The virtually indestructible Rock Turtle is an ideal tool case, especially for frequent flyers. The plastic shells are made from HDPE material using rotational molding technology. The upper and lower plastic shells are connected by an interlocking aluminum frame. The case is airworthy, mobile and stackable. It has ball-bearing hard plastic castors and an adjustable telescopic handle with ergonomic grip. Product features - Document compartment in the lid - 2 lockable TSA locks incl. key - 1 ergonomic two-component handle - Locking telescopic handle and large, smooth-running transport wheels - Large storage space for hand and power tools and spare parts in the base area - Reliable hinge riveted at several points - 2 lid holders with locking system - 2 small parts containers (Art. WL01 + WL02) - Stackable Illustrations with fittings and decorative items (not included in the price)
The virtually indestructible Rock Turtle is an ideal tool case, especially for frequent flyers. The plastic shells are made from HDPE material using rotational molding technology. The upper and lower plastic shells are connected by an interlocking aluminum frame. The case is airworthy, mobile and stackable. It has ball-bearing hard plastic castors and an adjustable telescopic handle with ergonomic grip. Product features - Document compartment in the lid - 2 lockable TSA locks incl. key - 1 ergonomic two-component handle - Locking telescopic handle and large, smooth-running transport wheels - Large storage space for hand and power tools and spare parts in the base area - Reliable hinge riveted at several points - 2 lid holders with locking system - 2 small parts containers (Art. WL01 + WL02) - Stackable Illustrations with fittings and decorative items (not included in the price)
Regular price:
€486.99
Prod. no.:
HW1401
TOOL CASE V-ROCK TURTLE PSS
Internal dimensions LxWxD: 470 x 390 x 320 mm
New vertical tool case, made entirely of HDPE resin, a real shield against accidental shocks. Special extra thick aluminium trim for tight closure. High capacity case with reinforced corners, ideal for air travelling engineers that carry both tools, spare parts and components. Resistant to airport handling.General features:• two ergonomic handles with rubber coated grip• telescopic handle and new Ø 120 mm wheels provided with sealed ball bearings• large base area for tools, power tools, accessories and spare parts• New gas pressurized lid supports• INTELLIRESPOND system• document wallet• 2 TSA accepted locks• 3 small component boxes (Art. WL01 + WL02)• stackability 1 lid tool pallet with with PSS™ system on one side• 1 middle tool pallet with PSS™ system on both sides• 1 bottom pallet with PSS™ system on one side Pictures with assembly and decoration (not included in the price)
New vertical tool case, made entirely of HDPE resin, a real shield against accidental shocks. Special extra thick aluminium trim for tight closure. High capacity case with reinforced corners, ideal for air travelling engineers that carry both tools, spare parts and components. Resistant to airport handling.General features:• two ergonomic handles with rubber coated grip• telescopic handle and new Ø 120 mm wheels provided with sealed ball bearings• large base area for tools, power tools, accessories and spare parts• New gas pressurized lid supports• INTELLIRESPOND system• document wallet• 2 TSA accepted locks• 3 small component boxes (Art. WL01 + WL02)• stackability 1 lid tool pallet with with PSS™ system on one side• 1 middle tool pallet with PSS™ system on both sides• 1 bottom pallet with PSS™ system on one side Pictures with assembly and decoration (not included in the price)
Regular price:
€522.92
Prod. no.:
HW1400
TOOL CASE V-ROCK TURTLE PTS
Internal dimensions LxWxD: 470 x 390 x 320 mm
New vertical tool case, made entirely of HDPE resin, a real shield against accidental shocks. Special extra thick aluminium trim for tight closure. High capacity case with reinforced corners, ideal for air travelling engineers that carry both tools, spare parts and components. Resistant to airport handling.General features:• two ergonomic handles with rubber coated grip• telescopic handle and new Ø 120 mm wheels provided with sealed ball bearings• large base area for tools, power tools, accessories and spare parts• New gas pressurized lid supports• INTELLIRESPOND system• document wallet• 2 TSA accepted locks• 3 small component boxes (Art. WL01 + WL02)• stackability • 1 lid tool pallet with pouches on both sides• 1 bottom tool pallet with pouches on one side Pictures with assembly and decoration (not included in the price)
New vertical tool case, made entirely of HDPE resin, a real shield against accidental shocks. Special extra thick aluminium trim for tight closure. High capacity case with reinforced corners, ideal for air travelling engineers that carry both tools, spare parts and components. Resistant to airport handling.General features:• two ergonomic handles with rubber coated grip• telescopic handle and new Ø 120 mm wheels provided with sealed ball bearings• large base area for tools, power tools, accessories and spare parts• New gas pressurized lid supports• INTELLIRESPOND system• document wallet• 2 TSA accepted locks• 3 small component boxes (Art. WL01 + WL02)• stackability • 1 lid tool pallet with pouches on both sides• 1 bottom tool pallet with pouches on one side Pictures with assembly and decoration (not included in the price)
Regular price:
€486.99
Prod. no.:
HW1417 - Auslaufartikel
Tool Jacket TOP N
General features:Multipurpose jacket with tool pouches.Adjustable velcro straps (shoulder and waist).Wide back padded ergonomic pouch.Name holder with velcro strap on the back.Phone pocket and hammer holder.
Pictures with assembly and decoration (not included in the price)
Regular price:
€69.62
Prod. no.:
HW1435 - Auslaufartikel
Tool roll 12T
Tool roll with 12 stitched pouches.
Pictures with assembly and decoration (not included in the price)
Regular price:
€22.71
Prod. no.:
HW1437 - Auslaufartikel
Tool roll 20T
Tool roll with 20 stitched pouches.
Pictures with assembly and decoration (not included in the price)
Regular price:
€25.48
Prod. no.:
HW1433 - Auslaufartikel
Tool roll 5T
Tool roll with 5 stitched pouches.
Pictures with assembly and decoration (not included in the price)
Regular price:
€15.11
Prod. no.:
HW1434 - Auslaufartikel
Tool roll 9T
Tool roll with 9 stitched pouches..
Pictures with assembly and decoration (not included in the price)
Regular price:
€16.30